Features

  • 48-bit CORP1000 cards are now supported.
  • Alert action delays can now be configured in seconds. In versions of Advanced View earlier than 4.6.2, delays under one minute are configurable, but will be shown as zero minutes in the Advanced View interface.
  • Advanced View on is now supported on Microsoft Windows Server 2016.

Fixes

  • Temperature measurements are no longer capped at 113°F. To apply this change, reset the configuration to default values. (See FAQ article FA158175: go to www.apc.com, select Support > Resources and Tools > FAQs, and type the article number into the Search bar.) If you restore the configuration with a pre-4.6.2 backup file, the previous measurement cap will also be restored.
  • Spot leak sensors can be connected to a total of six Universal Sensor ports on a NetBotz Rack monitor 450, 550, or 570 and any attached Sensor Pod 150 units.

See the release notes for more information.

See also

 


 

Features

  • 48-bit CORP1000 cards are now supported.
  • In versions of Advanced View earlier than 4.6.2, delays under one minute are configurable, but will be shown as zero minutes in the Advanced View interface.
  • Advanced View on is now supported on Microsoft Windows Server 2016.

Fixes

  • Temperature measurements are no longer capped at 113°F. To apply this change, reset the configuration to default values. (See FAQ article FA158175: go to www.apc.com, select Support > Resources and Tools > FAQs, and type the article number into the Search bar.) If you restore the configuration with a pre-4.6.2 backup file, the previous measurement cap will also be restored.
  • Spot leak sensors can be connected to a total of six Universal Sensor ports on a NetBotz Rack monitor 450, 550, or 570 and any attached devices. 
Skip to end of metadata
Go to start of metadata
  • No labels
RELATED COMMUNITY QUESTIONS
WAS THIS ARTICLE HELPFUL?