In System Setup > External Systems Configuration, you can set up integration with an external system. Select the type of server, e.g. StruxureWare Data Center Expert or VMware vCenter server, and enter the server communication data.

The latest version of the integration software is supported (unless any issues with the latest versions are specified in the known issues section relevant for your DCO version).

Once the communication between the servers has been established, the Data Center Operation server retrieves alarms and measured data from the external monitoring system or migration data from the virtualization system. When you have configured the physical location of these real-world devices, the system can guide you and show any active and potential problem areas in your data center.

Alarms and migration data is collected in real time and allows you to monitor and react instantly on critical data.

You must ensure time synchronization has been configured for the servers.

Supported product versions:

  • VMware vSphere 6 and 6.5
  • Cisco UCS 3.0, 3.0.1, and 3.0.2
  • BMC Remedy 8.1 (Not the latest version)
  • SCOM 2012 R2 (Not the latest version)
  • Data Center Expert 7.3.1 & 7.4.x
  • ITO Server Version 7.5.2.0.119
  • Power Monitoring Expert: PMEDC 8.1
  • HP OneView 3.0
  • Cooling Optimize 6.6

 

 

Skip to end of metadata
Go to start of metadata
RELATED COMMUNITY QUESTIONS
WAS THIS ARTICLE HELPFUL?